Stone polishing machine is a stone surface, edge grinding, polishing and other different processes of multi-functional machine, understand the types of stone polishing machine, working principle, use of skills, can help you achieve the desired processing results.
First, the types of stone polishing machine
1. manual stone polishing machine: suitable for dealing with small areas of stone, easy to operate, suitable for a variety of thicknesses of plates and tombstones and other flat grinding.
2. bridge type stone polishing machine: used for large area stone surface grinding, high degree of automation, efficiency is also very good, common in stone processing plant.
3. multi-head continuous polishing machine: this is a special equipment in the production line, can smoothly complete the whole process from rough grinding to fine polishing, suitable for high-volume processing.
4. portable stone polishing machine: small size, easy to carry, suitable for the site of a small range of polishing, commonly used in stone care and maintenance.
Second, the working principle of stone polishing machine
Stone polisher is through the following steps to achieve polishing:
1. coarse grinding stage: the use of diamond grinding disc to remove the uneven part of the stone surface.
2. fine grinding stage: gradually switch to finer abrasives for fine grinding.
3. polishing stage: final polishing with resin discs or felt wheels with polishing compounds.
4. crystallisation (optional): increase the luster and hardness of the stone surface through chemical reaction.
Third, the stone polishing machine purchase guide
In the purchase of stone polishing machine, should consider these factors:
1. processing needs: according to the area of the stone to be processed and frequency to choose the right equipment.
2. power size: generally between 1.5-5HP, the higher the power, the higher the efficiency.
3. Speed adjustment: adjustable speed models can adapt to different polishing stages.
4. weight and portability: if it is for on-site use, you have to consider the movement of the equipment.
5. accessories supply: understand the grinding discs and other wearing parts of the replacement cost and access to difficulty.
Fourth, the use of stone polishing machine skills
Preparation
- Clean the surface of the stone, remove impurities.
- According to the type of stone to choose the appropriate grinding disc and polishing agent.
- Check whether the various parts of the equipment is installed firmly.
Operating points
- Replace the grinding discs in the order from coarse to fine.
- Maintain an even speed to avoid localised over-polishing.
- Regularly check the wear of the discs and replace them in time.
- Use the right amount of water to cool down and prevent the stone from cracking.
Safety Precautions
- Wear protective glasses and dust mask.
- Ensure that the working area is well ventilated.
- Keep the equipment in a stable position when running.
- Regularly check the insulation of the wire.
Fifth, stone polishing machine maintenance
Clean the equipment after each use, especially the heat sink. Regularly check the wear and tear of carbon brushes and replace them in time. Bearing parts should be regularly refuelled. Store the equipment in a dry place to avoid dampness of the motor.
When not in use for a long time, disconnect the power supply and remove the grinding disc.
The use and maintenance of stone polishing machine
2025-04-30
Categories
Tags